Martindale Machine: ISO 12947 vs ASTM D4966
Nov 17, 2026
Martindale Machine: ISO 12947 vs ASTM D4966
Importance of Martindale Abrasion Testing in Textile Quality Control
In textile manufacturing, fabrics undergo repeated multi‑directional rubbing stress in end‑use scenarios. Fabrics are rubbed, scuffed and worn from various directions in daily service. For example, upholstery, workwear, home textiles and automotive interior fabrics face constant surface friction.
To evaluate fabric’s ability to withstand repeated rubbing wear, a martindale abrasion & pilling tester is deployed. During this test, the fabric specimen is rubbed against standard abradant material under controlled pressure and Lissajous‑figure motion until defined failure criteria are reached. This test is critical because it reflects real‑world fabric durability and wear performance.
Testing Principles
ASTM D4966 and The Nartindale Abrasion Tester Method
ASTM D4966 follows the classic Martindale abrasion principle. Circular fabric specimens are secured into sample holders, and rubbed against standard worsted‑wool abradant fabric. The test runs on Lissajous‑figure multi‑directional movement under specified loading pressure. The cycle count recorded when yarn breakage occurs represents fabric abrasion resistance value.
ISO 12947 and the Martindale Pilling Test Method
The ISO 12947 series also adopts Martindale multi‑directional rubbing principle. Specimens are rubbed against standardized worsted‑wool abradant along defined Lissajous motion paths under designated pressure load. ISO 12947 defines clearer rules for abradant replacement, backing foam installation and inspection intervals to reduce result variation.
Difference in Testing Principles
Even though ISO 12947 and ASTM D4966 share identical Martindale machine hardware core principle, subtle procedural differences mean test outputs are not fully interchangeable. Identical fabric may return different cycle numbers between two standards, due to differences in specimen quantity and endpoint assessment rules.
For this reason, modern Martindale abrasion testers GT‑C13B support both ASTM D4966 and ISO 12947‑compliant test workflows in one unit, satisfying diverse global market buyer demands